If you dont see this e-mail properly, or you want to print it, try the online version !

Dear valued Customer,

the Bustec Production Newsletter offers information about new products, hard- and software updates and related issues. Feel free to share it with your colleagues.

In this issue:

New Products

Coming Soon

Updates

New Products

ProDAQ 3044 1.3 GHz PowerPC® based VXIbus Slot-0 Controller

The new ProDAQ 3044 Slot-0 Controller extends the successful line of PowerPC-based Slot-0 Controllers provided by Bustec Production Ltd. It features the MPC7457 PowerPC® processor running at 1.267 GHz, up to 2GB of on-board DDR ECC memory and 128MB of Flash, two 33/66/100 MHz PMC-X sites, dual Gigabit Ethernet interfaces and the new Tundra Tsi148® VXIbus interface chip. It is the first VXIbus slot-0 controller supporting the 2eVME protocol specified in the VXIbus System Specification Revision 3.0, which will boost the backplane transfer rates to a theoretical possible maximum of 160 MBytes/sec. Learn more ... More Information: http://www.bustec.com/products/3044.html

ProDAQ 3048 2 GHz Intel® Core™ Duo based VXIbus Slot-0 Controller

The Intel® Core™ Duo microprocessors offer more processing capacity, consume less power and generate less heat. They bring the focus back on overall system performance, rather than traditional clock speed.
The ProDAQ 3048 features a 2.0 GHz T2500 processor together with the Mobile Intel® 945GM Express chipset, up to 4 Gbytes of 667MHz DDR2 SDRAM with dual channel architecure, a front-panel 10/100/1000Mbps ethernet interface, powerful graphics with a resolution up to 2048 x 1536 with up to 16M colors, a PMC/XMC slot, and, and, and ... Learn more ... More Information: http://www.bustec.com/products/3048.html

ProDAQ 3951 2-Ch. Filter/Synchronization Function Card

The ProDAQ 3951 function card is a 2-channel analog filter card. It provides a set of 8-order analog filters for applications that need higher filter capabilities than those already implemented on the ProDAQ ADC and DAC function cards. It also features a DDS clock circuitry to allow function cards like for example the ProDAQ 3550 to synchronize to the synchronization scheme used by the ProDAQ 3424 and ProDAQ 3808 function card. Learn more ... More Information: http://www.bustec.com/products/3951.html

ProDAQ 5748 Rack-mount Break-out Box for ProDAQ 3424

The ProDAQ 5748 is a 1U heigh rack-mountable break-out box for standard 19″ racks. Up to two ProDAQ 3424 24-bit Sigma-Delta ADCs can be connected to the unit. For each connected ADC, the unit provides 8 channels of standard BNC connectors, configured as isolated pseudo-differential inputs. The ProDAQ 3424 ADCs are connected via two standard 50-pin SCSI connectors on the back of the break-out box. Each channel is equipt with a LED indicator for ICP mode. This indicator is directly controlled by the ProDAQ 3424 Function Card. Learn more ... More Information: http://www.bustec.com/products/5748.html

Coming Soon

ProDAQ 3180 Next-generation Motherboard

We did it! The new ProDAQ 3180 motherboard is in its final testing and will be available in Q2/2007. And it's truly a new generation of motherboard with:

  • 8-times the DRAM space,
  • 25-times the DRAM read/write speed,
  • 20-times the DSP Performance,
  • 4-times the Function Card Bus speed,
  • 4-times the VXIbus transfer speed

then the ProDAQ 3150 motherboard.

Starting with the VXIbus interface, it now supports the 2eVME protocol specified in the VXIbus System Specification Rev.3.0, which will boost the backplane transfer rates to a theoretical possible maximum of 160 MBytes/sec. It can host a TigerSHARC DSP with a clock speed of 400 MHz, providing unmatched 4800 MMACs of 16-bit performance and 3600 MFLOPS of floating-point performance. The DSP can be paired with 512MB or 1GB DDR2 DRAM with sustained transfer rates of 500 MB/s. And, last not least, the new function card bus on the ProDAQ 3180 allows for up to 80 MB/s transfer rate per function card (fully backward compatible).

Updates

ProDAQ VXIplug&play Driver

The VXIplug&play driver for the ProDAQ 3951 function card has been added to our driver library. It is available for download in the support/driver section of our site. (http://www.bustec.com/support/driver.html)

 

If you want to unsubscribe from our mailing list, please go to our WEB site at http://www.bustec.com/products/unsubscribe.php and enter your e-mail address.

Bustec, the Bustec logo and ProDAQ are trademarks of Bustec Production Ltd. Other brands and names mentioned in this email are the property of their respective owners.