products 3000 series 3100 series 3200 series 3400 series 3500 series 3600 series 3800 series 3900 series 5000 series
Bustec ProDAQ VXI and VXIbus products Bustec Productions Ltd.

ProDAQ 3047
Pentium-M based VXIbus Slot-0 Controller

  • Single Slot C-Size VXIbus Slot-0 Controller
  • 1.6 GHz Pentium-M Processor with 400 MHz Front Side Bus
  • Up to 2 GByte 333 MHz DDR ECC SDRAM
  • Two Gigabit Ethernet Interfaces
  • PMC Expansion Slots with Front-Panel I/O
  • Slot-0/non-Slot-0 Operation (Automatic)
  • C-Size 1 Slot wide VXIbus Module

General

The ProDAQ 3047 Intel Pentium-M processor based Slot-0 Controller provides a powerful, fully customizeable platform for embedded applications with a processor speed of 1.6 GHz. The 32-bit processor supports the Dual Independent Bus (DIB) architecture with the backside bus connected to the "on-die" Level 2 cache and the 64-bit frontside bus connected to the memory controller at 400 MHz to provide a maximum theoretical transfer bandwidth of 3.2 GByte/s.

PCI Busses

The ProDAQ 3047 features two on-board PCI busses provided by the 6300ESB I/O controller Hub. The primary bus is 64-bit wide and able to operate at 33 or 66 MHz. It connects the two Gigabit Ethernet interfaces and the PMC site with the Hub. The secondary bus connects the VXIbus interface to the hub, using 32-bit at 33 MHz.

DRAM Memory

The ProDAQ 3047 supports up to 1 GByte of ECC protected DDR333 SD-RAM on-board plus up to 1 GByte ECC protected DDR333 SD-RAM in one SO-DIMM socket for a maximum memory capacity of up to 2 GByte.

Super VGA Controller

High-resolution graphics and multimedia-quality video are supported on the ProDAQ 3047 by a built-in 855GME graphics adapter, using up to 64 MBytes of UMA memory. Screen resolutions up to 2048x1536@75Hz and up to 16M colors are supported by the graphics adapter.

Ethernet Controllers

The ProDAQ 3047 supports Ethernet LANs with two Intel 82546GB Ethernet controllers. 10 Base-T, 100 Base-TX and 1000 Base-T are supported via two RJ45 connectors.

I/O Ports

Two 16550-compatible serial ports, a combined PS/2 keyboard and mouse connector and a USB2.0 host controller port are featured on the ProDAQ 3047's front panel.

PMC Expansion Slot

One PMC Expansion slot provide the capability of customization to satisfy the application needs. The PMC slot excepts PMC expansion cards operating at 3.3V or 5V signaling levels and can operate in either 32-bit or 64-bit mode at both 33MHz or 66 MHz.

Hard Disk Drive

The ProDAQ 3047 features a high-density 2.5" hard disk drive. Different capabilities are available.

Trigger Interface

The ProDAQ 3047 supports both the VXIbus TTL and ECL trigger lines. Trigger signals can be generated under software control. On detection of a trigger signal a local interrupt can be generated.

Software

Board Support Packages as well as a VISA library and resource manager according to the VXIbus and VXIplug&play standard are available for a number of operating systems. Please contact Bustec Production Ltd. for an up-to-date list.

Download the datasheet for the ProDAQ 3047 Slot-0 Controller ...