ProDAQ 5716 16-Channel Bridge Signal Conditioning Unit

  • 1U, 19 in. rack-mount break-out box
  • Connects to ProDAQ 3416 or up to two ProDAQ 3424 function cards
  • Bridge completion for quarter-bridge and half-bridge strain gauges
  • Remote or internal sensing
  • Built-in shunt calibration and autobalancing
  • IEPE and TEDS support
  • Auxiliary conditioned analog outputs for connection to controller or other device
Size Guides

SIZE GUIDE

Image
JEANS
SIZEXSSMLXLXXL
BUST888990919293
WAIST555658596265
HIPS909294959698
T-SHIRTS
SIZEXSSMLXLXXL
BUST606265666869
WAIST505558626566
HIPS808285868889
SKU: ProDAQ 5716 Category: Tag:
Delivery and return
Delivery and return
Shipping Information
Shipping Information
Composition and care
Composition and care

Description

Description:

The ProDAQ 5716 is a 1U high rack-mountable signal conditioning box for standard 19 in. racks. It provides signal conditioning for up to 16 strain gage or IEPE sensors. Either one ProDAQ 3416 16-Channel ADC Function Card or up to two ProDAQ 3424 8-Channel 24-bit Sigma-Delta ADC Function Cards can be connected to the unit.

The bridge signal conditioning provides a per-channel programmable excitation voltage of up to 20 V by allowing the positive and negative excitation voltage to be programmed individually between 0..10 V (positive side) and 0..-10 V (negative side) with the current limited to 50 mA per channel. By using remote sense lines per channel any losses due to lead resistance will be automatically compensated. Built-in high-precision resistors of 120 and 350 Ohm as well as sockets for user-installable resistors allow for flexible quarter and half-bridge completion.

Each input channel is equipped with a shunt calibration resistor and provisions for removing bridge offset voltage. A trifilar common mode filter will remove any unwanted high-frequency common mode signals. Each channel also contains selectable AC/DC coupling and IEPE signal conditioning circuitry. Both TEDS class 1 and class 2 are supported.

Specifications

Specifications:

  • 1U, 19 in. rack-mount break-out box for ProDAQ ADC function cards
  • Connects to ProDAQ 3416 or up to 2 ProDAQ 3424 function cards
  • Lemo and RJ-45 connector options available
  • 0 to +/- 10 V excitation voltage, accurate to 0.05%
  • 50 mA per channel maximum excitation current
  • 120 Ohm, 350 Ohm, or custom (user-installable) bridge completion resistors, software-selectable
  • View complete specification

Accessories

Accessories:

ProDAQ 5726 Stackable Tabletop Feet Set