ProDAQ 6151 Isolated Precision Thermocouple LXI Instrument
- 19”, 1U Solution for 16 Thermocouple Channels
- Support for all common thermocouple types
- Channel Isolation up to 300 VDC (channel to channel and channel to ground)
- CJC Sensor per channel
- 24-Bit Sigma Delta ADC per channel
- Two Analog Outputs per channel, 0V to +10V
- Simultaneous Sampling of all channels
- Open Thermocouple Detection and Indication for all channels
Size Guides
SIZE GUIDE
JEANS
| SIZE | XS | S | M | L | XL | XXL |
|---|---|---|---|---|---|---|
| BUST | 88 | 89 | 90 | 91 | 92 | 93 |
| WAIST | 55 | 56 | 58 | 59 | 62 | 65 |
| HIPS | 90 | 92 | 94 | 95 | 96 | 98 |
T-SHIRTS
| SIZE | XS | S | M | L | XL | XXL |
|---|---|---|---|---|---|---|
| BUST | 60 | 62 | 65 | 66 | 68 | 69 |
| WAIST | 50 | 55 | 58 | 62 | 65 | 66 |
| HIPS | 80 | 82 | 85 | 86 | 88 | 89 |
Delivery and return
Delivery and return
Shipping Information
Shipping Information
Composition and care
Composition and care
Description
Product Overview:
The ProDAQ 6151 is an LXI instrument designed for 16-channel isolated precision thermocouple measurements. It supports many common thermocouple types, namely types J, K, N, C, T and E. Each channel is isolated from both the chassis and all other channels.
The ProDAQ 6151 provides an easy to use, cost effective and scalable solution for the most demanding thermocouple measurement applications. As a standalone LXI instrument it can be directly connected to your network and operated either through the integrated web pages or integrated to your data acquisition application using the VISA I/O library. Measurement data can be read from the instrument or directly streamed to one or several servers. Multiple devices can be synchronized via the IEEE1588 precision time protocol. The unit is equipped with a redundant power supply and two Ethernet ports.
Specifications
Specifications:
- General
- Number of signal channels: 16
- Isolation: 300 VDC (Channel to channel, channel to outputs and channel to chassis)
- Isolated Analog Output: Two per Channel, ±10V, Filtered, Buffered, Short Circuit Protected
- Noise, at Analog output: <100uVrms
- ADC Resolution: 24-bit
- ADC Sampling Rates: 1 to 1000 Samples per second, 1Hz Resolution
- EMI Filtering: Yes, per channel
- Channel Input Protection: Yes, ±30V, max. input current 10mA, max. 3A <10ms.
- Input Impedance: ≥ 1MΩ
- Common Mode Rejection Ratio: ≥ 80dB
- Linearizer: In built Linearizer through software
- Calibration: Factory calibrated. Software calibration (zero and gain)
- Response Time: <100ms at 1kSPS
- Input Range ability: Min and Max range configurable
- Turn Down ratio: 20:1
- Thermocouple Measurement
- Thermocouple Types: J, K, N, C, T, E
- Temperature Span:
- Type J: -200 °C to +700 °C
- Type K: -200 °C to +1200 °C
- Type N: -200 °C to +1250 °C
- Type C: 0 °C to +2300 °C
- Type T: 0 °C to +400 °C
- Type E: 0 °C to +700 °C
- Temperature Accuracy:
- Type J: ≤ ±(0.6 °C +0.05% Span) °C
- Type K: ≤ ±(0.5 °C +0.05% Span) °C
- Type N: ≤ ±(0.5 °C +0.05% Span) °C
- Type C: ≤ ±(1.0 °C +0.05% Span) °C
- Type T: ≤ ±(0.5 °C +0.05% Span) °C
- Type E: ≤ ±(0.5 °C +0.05% Span) °C
- Cold Junct Compensation: Per channel, accuracy ±0.5˚C
- Temperature Stability: ≤ 50ppm/˚C
- Open TC Detection: Yes, per channel
- Open TC Indication: Yes, per channel, Front Panel LED and Software
- Filtering: Low pass, 100Hz FIR filter @1kSPS, 14 taps, scales proportionally with sampling rate
- Analog Output
- Analog Output Voltage: 0V to +10V
- Number of analog outputs: 2 per channel
- Output resistance: ≤ 1Ω
- Control Interface
- Physical Interface: Two redundant network ports, 10/100/1000 Base-TX
- Software Interface: SCPI over VXI-11 protocol (VISA), TCP/IP, Web Interface
- Operating System Support: Windows 10
- Environmental
- Temperature: 5 °C to +50 °C (operational), -40 °C to +70 °C (storage only)
- Humidity: 5% – 95% (non-condensing)
- Size: 425 mm x 330 mm x 43.5 mm (excl. connectors)
- Weight: 5 kg
- Power Supply
- Input: Two redundant inputs, 85 – 264V AC, 47 – 63 Hz each
- Power: 40W typical
